Real humans read every request · typical reply in 2 hours · All 67 Florida counties. Same-day dispatch in most FL metros. Standing weekly programs statewide.
FP
Florida Pallet Supply
Let's start0% done
Cold Chain & Freezer Pallets 2026
Last updated: 4 August 2026.
Wood vs plastic comparison, FSMA/BRC/SQF compliance, deep-freeze ratings, and sourcing for cold storage facilities across FL, GA, NJ, MD, and DE. Florida Pallet Supply delivers new, recycled, custom, and ISPM-15 heat-treated pallets to all 67 Florida counties, with same-day dispatch from its Tampa, Orlando, Jacksonville, Miami, and Lakeland yards and a 50-pallet minimum order.
Stamped kiln-dried pallet lumber, bulk warehouse stock, dimensional yard inventory, raw softwood logs, and sawmill operations - the supply chain behind every custom and standard pallet we ship.
Kiln-dried stamped pallet lumber boards in stack at sawmillBulk pallet lumber storage in covered warehouse - dimensional pallet stockDimensional pallet lumber stacks with grading marks in lumber yardSoftwood pallet logs - raw timber for pallet lumber millingSawmill aerial view of lumber yard with pallet supply inventory
Cold chain logistics - frozen food, fresh produce, pharmaceuticals, and dairy - place unique stresses on pallets. Temperature cycling between -20°F and +70°F causes wood to expand, contract, and eventually crack. Condensation promotes mold. And food safety regulations make contamination tolerance zero. Choosing the right pallet type for cold chain can prevent product loss, inspection failures, and pallet collapse mid-load.
❄️ Need cold chain pallets in FL, GA, NJ, MD, or DE? We stock food-grade and plastic pallets with rapid delivery to cold storage facilities.
Where these come from, and what the cost column can and cannot tell you. The two wood rows are published ranges: Grade A recycled GMA at $9 to $13 in our pallet cost guide and independently on our pallet grades guide. The block row is derived and the arithmetic is here: the 15% to 30% block premium applied to the Grade A stringer range ($9 x 1.15 = $10.35, $13 x 1.30 = $16.90, rounded to $11 to $17), the same figure we publish on our South Carolina guide so the two pages do not disagree. The plastic rows are deliberately not a purchase price. The only plastic number this site publishes is a pooled rental cost of $4 to $7 per trip, from our plastic pallet comparison, and putting a purchase figure in that cell would mean inventing one. That comparison is also the honest way to read this row: plastic wins on sanitation and on deep-freeze temperature range, and the trip economics only favour it on genuinely closed loops, because the same comparison shows owned wood pulling ahead by roughly the third trip. Corrugated is quote-only because it is specified per load. For a figure against your temperature band and turn rate, ask for a quote.
Wood pallets degrade faster in cold storage for four reasons:
Thermal cycling: Repeated freeze-thaw cycles cause wood fibers to expand and contract, splitting stringers and deck boards over time. A pallet rated for 100+ cycles in ambient conditions may fail in 30-40 cycles in a deep freeze.
Moisture absorption: When a pallet moves from a freezer (< 0°F) to a receiving dock (70°F), condensation forms rapidly. Wet wood is weaker and promotes mold growth.
Nail loosening: Metal nails expand and contract at a different rate than wood, causing them to loosen over thermal cycles - creating the protruding nail hazard OSHA flags in inspections.
Mold risk: FDA 21 CFR and FSMA's HARPC require facilities to prevent cross-contamination between pallets and food product. Moldy or wet wood pallets are a documented contamination vector.
Plastic Pallet Selection Guide for Cold Chain
Specification
Nestable Plastic
Rackable Plastic
Dynamic Load Capacity
2,000 - 2,500 lbs
2,500 - 4,000 lbs
Static Load Capacity
20,000 - 25,000 lbs
25,000 - 35,000 lbs
Rack Compatible
No (floor storage only)
Yes (beam rack rated)
Forklift Entry
2-way
4-way
Sanitation
Pressure wash, chemical sanitize
Pressure wash, chemical sanitize
Weight
25 - 35 lbs
45 - 65 lbs
Cold Storage Lifespan
5-8 years
8-12 years
Cold Chain Pallet Regulations and Standards
FDA 21 CFR Part 1 (FSMA): HARPC plans must address pallet contamination as a physical hazard. Facilities must document pallet inspection programs.
USDA AMS: USDA-inspected facilities (meat, poultry, egg) must use pallets free of pest evidence, mold, and chemical contamination at point of use.
BRC Global Standard (Issue 9): Requires documented pallet inspection program and prohibits use of pallets from unknown sources in food contact zones.
SQF Code (Edition 9): Section 11.7.2 specifically addresses packaging and pallet integrity for food safety.
GDP (Pharmaceutical): Cold chain pharma requires documented pallet inspection, separation from non-pharmaceutical stock, and use of approved materials.
Cold Storage Facilities We Serve
We regularly supply pallets to cold storage and temperature-controlled distribution centers across our five-state territory:
Wilmington (fresh fruit port), New Castle (pharma)
Frequently Asked Questions
Rackable plastic pallets (HDPE or polypropylene) are the best choice for deep-freeze environments below -10 degrees F. They tolerate temperatures down to -40 degrees F, do not absorb moisture, and maintain structural integrity through thousands of freeze-thaw cycles. They are more expensive upfront ($80-120 each) but last 8-12 years in cold storage versus 1-3 years for wood pallets in the same environment.
Recycled wood pallets can be used in refrigerated (above 32 degrees F) environments with proper inspection. Grade A recycled pallets in good condition are acceptable in many FDA and FSMA-regulated facilities, provided they pass a contamination inspection and are kept dry. Facilities with BRC or SQF certification may require new pallets or documented Grade A stock with supplier verification. Deep freeze (-10 degrees F and below) is not recommended for wood.
Switching from wood to plastic pallets can simplify your FSMA Hazard Analysis and Risk-Based Preventive Controls (HARPC) plan by eliminating wood splinter hazards and reducing the pallet contamination pathway. Plastic pallets still require cleaning verification - pressure wash and sanitize between uses in contact zones. Document the changeover in your HARPC and update your pallet inspection SOP.
Yes. We stock nestable and rackable plastic pallets in standard GMA 48x40 footprint for delivery across FL, GA, NJ, MD, and DE. Quantities available vary - contact us for current stock levels and lead time. We recommend ordering plastic pallets on a net-new basis rather than recycled since documented sanitation history is often required for food and pharma applications.
Request: (1) A letter of conformance stating pallet grade, species, and treatment type, (2) documentation that pallets are free of chemical treatment other than kiln-drying (for food applications), (3) ISPM-15 treatment certificates if pallets will be used for international export, and (4) inspection records showing the pallets were visually inspected before delivery. We provide all of these for qualified cold chain customers on request.
